Resource title

Monitoring of the BTA Deep Hole Drilling Process Using Residual Control Charts

Resource image

image for OpenScout resource :: Monitoring of the BTA Deep Hole Drilling Process Using Residual Control Charts

Resource description

Deep hole drilling methods are used for producing holes with a high lengthto- diameter ratio, good surface finish and straightness. The process is subject to dynamic disturbances usually classified as either chatter vibration or spiralling. In this work, we propose to monitor the BTA drilling process using control charts to detect chatter as early as possible and to secure production with high quality. These control charts use the residuals obtained from a model which describes the variation in the amplitude of the relevant frequencies of the process. The results showed that chatter is detected and some alarm signals are related to changing physical conditions of the process.

Resource author

Claus Weihs, Winfried Theis, Amor Messaoud, Franz Hering

Resource publisher

Resource publish date

Resource language

eng

Resource content type

text/html

Resource resource URL

http://hdl.handle.net/10419/22573

Resource license

Adapt according to the presented license agreement and reference the original author.